Connect the Camera to a Wired
Network for Setup
Set up the Video Camera
1
2
®
A Division of Cisco Systems, Inc.
F
Enter a unique name for the
Camera in the Camera Name
field, and complete the
Description field. Select your
time zone, and enter the date
and time. Then click Next.
A
Insert the Setup CD-ROM into
your CD-ROM drive. The Setup
Wizard should run
NOTE: If you want to connect the
Camera to a wireless network for
setup, refer to the User Guide on the
Setup CD-ROM for instructions.
automatically, and the
Welcome screen should
appear. If it does not, click
Start and then Run. In the field
provided, enter D:\wvc54g.exe
(if “D” is the letter of your CD-
A
Attach the antenna.
G If your network has a router or
other DHCP server, select
Automatic Configuration-
DHCP. If the Camera requires a
static IP address, keep the
default setting, Static IP
address.
B
Connect the included Ethernet
network cable to your router,
switch, or computer.
ROM drive).
F
A
B
Click Setup to begin the setup
process.
C Connect the other end of the
cable to the Ethernet port on
the Camera.
C Make sure the Camera is
properly connected to your
network. Click Next.
Click Next.
IMPORTANT: You MUST connect the
Camera to a router, switch, or PC* using
an Ethernet network cable BEFORE
powering on the Camera. Otherwise, the
Camera will not function.
H
If you selected Automatic
Configuration-DHCP in step G,
then proceed to step I.
D
The screen will display a list of
Wireless-G Internet Video
Cameras on your network and
status information. In the
Selection box, click the name
of the Camera you are
currently installing. Click Next.
C
D
C
D
G
H
If you selected Static IP
address, the IP Settings screen
will appear. Enter an IP
Package Contents
D
E
Connect the included power
adapter to the Power port on
the Camera.
• Wireless-G Internet Video Camera
• Camera Desktop Stand
• Detachable Antenna
Address, Subnet Mask, and
Default Gateway appropriate
for your network. You must
specify an IP Address and
Subnet Mask. If you are unsure
about the Default Gateway,
then leave this field blank.
Complete the Primary DNS
and/or Secondary DNS fields.
Enter at least one DNS address,
which you can obtain from
your ISP. Click Next.
• Power Adapter
E
A verify password screen will
appear. In lowercase letters,
enter admin in the
Administrator Name and
Password fields. Click OK.
• Ethernet Network Cable
• Setup CD-ROM with User Guide
• User Guide on CD
• Quick Installation Guides
• Sololink DDNS Free Trial Card
Plug the power adapter into
an electrical outlet.
The Ready LED flashes while
the Camera is initializing. When
the Camera is ready for setup,
the Ready and Ethernet LEDs
are solidly lit.
4GHz
2,
802.11g
NOTE: If your LAN IP address is
Wireless-G
different than 192.168.1.x, you
may get an error message when
you configure the camera through
your PC. Ignore the error message.
Internet Video Camera
* If connecting the Camera directly to a PC, Linksys recommends that you
use an IP address of 192.168.1.x (x can be any number from 1-254, but
cannot be the same as another device on your network).
Wireless
NOTE: The default IP address of the
Camera is 192.168.1.115.
Quick Installation
E
WVC54G (EU/UK)
Model No.
|
La Crosse Technology Clock Radio WT 5130ER User Manual
Lanier Scanner IS450DE User Manual
Life Fitness Treadmill TRST35 XXXX 01 User Manual
Linksys Switch EF1324 User Manual
Lucent Technologies Switch P118LX User Manual
Luce Projector PT L6600E User Manual
Manhattan Computer Products Computer Keyboard 176460 User Manual
Marshall electronic Microphone CE90V User Manual
Master Lock Portable Generator HWI3000 MGH3000 MGH3000PR MGH4000C MGH4000CI MGH5000D MGH5000DI MGH5000DIE MGH6000D MGH6000DI MGH7000D MGH7000DI MGH10000A User Manual
McCulloch Brush Cutter 248530 User Manual